Table of Contents
Advertisement
CHAPTER
3
HOW TO USE MINICUBE2 WITH V850 MICROCONTROLLER
(3) Execution of [Autoprocedure (EPV)] command
Click the [Device] menu on the menu bar and then click [Autoprocedure (EPV)].
The [Blank Check], [Erase] (if the flash memory in the target device is not blank), [Program], [Verify] are
executed for the target device sequentially. The mode LED on MINICUBE2 flashes yellow during execution.
When the command execution is completed normally, the mode LED glows green and the following window
appears.
Figure 3-25. Completion of [Autoprocedure (EPV)] Command Execution
49
User's Manual
U18371EJ5V0UM
Advertisement
Table of Contents
