Renesas QB-MINI2 User Manual page 101

CHAPTER 4 HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
(1) Setting of programming environment
Set the programming environment, following the steps <1> to <6> described below.
<1> Click the [Device] menu on the menu bar and then click [Setup...].
<2> The Device Setup dialog box appears, in which the [Standard] tab is active.
Figure 4-40. [Standard] Tab of Device Setup Dialog Box
<3> Click the PRM File Read button to open the Parameter File Select dialog box. Select the parameter
file for the target device and then click the Open button.
Figure 4-41. Parameter File Select Dialog Box
99
User's Manual U18371EJ5V0UM