Table of Contents
Advertisement
CHAPTER
3.1.2
Circuit connection examples
The circuit design on the target system varies depending on the communication interface mode. Refer to the
following table and see the relevant circuit connection example.
Caution The constants described in the circuit connection example are reference values.
flash programming aiming at mass production, thoroughly evaluate whether the specifications of
the target device are satisfied.
20
3
HOW TO USE MINICUBE2 WITH V850 MICROCONTROLLER
Table 3-3. Corresponding Circuit Connection Diagrams
Communication Interface Mode
UART
CSI-H/S
User's Manual
Refer to:
Figure 3-2
Figure 3-3
U18371EJ5V0UM
If you perform
Advertisement
Table of Contents
