Table of Contents
Advertisement
This section describes the method to perform self-testing with MINICUBE2.
The MINICUBE2 diagnostic tool can be used to find if the reason that the debugger does not operate normally
derives from a MINICUBE2 defect or from other hardware.
7.1 System Configuration
Figure 7-1 illustrates the system configuration for self-testing.
<4>
<4>
<1> Host machine
Products with USB ports
<2> Software
Includes the USB driver and MINICUBE2 diagnostic tool.
These software can be installed when an NEC Electronics debugger or QB-Programmer is installed.
Download these NEC Electronics software from the following website (ODS).
URL: http://www.necel.com/micro/ods/eng/
<3> USB cable (accessory)
<4> MINICUBE2 (this product)
CHAPTER
7
Figure 7-1. System Configuration for Self-Testing
<3>
<3>
User's Manual
SELF-TESTING
U18371EJ5V0UM
<1>
<1>
<2>
<2>
169
Advertisement
Table of Contents
