E1/E20 Emulator
1.2. System Configuration
The E1 or E20 emulator is used by connecting it to the target MCU mounted on the user system.
Figure 1.1 shows the configuration of the emulator system.
Host computer
USB interface cable
Figure 1.1 System configuration with an Emulator
(1) E1 or E20 emulator
(2) USB interface cable
(3) User-system interface cable (included)
(4) User system
This is your application system using the MCU to be debugged. The E20 emulator cannot supply power to the
user system. Get a power supply separately.
(5) Host machine
A personal computer to control the emulator by USB interface.
1.3. PC Interface
USB Interface *1
USB 2.0 high-speed (also connectable to the USB 1.1-compatible host machine)
Note: 1 Not guaranteed to operate in any combination of a host machine, USB device, and USB hub.
R20UT0398EJ0401 Rev.4.01
Mar 15, 2016
(with the 14-or 38-pin connector)
Integrated Development Environment
+
Emulator debigger
(this product)
(included)
User-system interface cable
E1 or E20 emulator
Outline
User system
Page 12 of 40