Renesas QB-MINI2 User Manual page 47

CHAPTER 3 HOW TO USE MINICUBE2 WITH V850 MICROCONTROLLER
(1) Setting of programming environment
Set the programming environment, following the steps <1> to <7> described below.
<1> Click the [Device] menu on the menu bar and then click [Setup...].
<2> The Device Setup dialog box appears, in which the [Standard] tab is active.
Figure 3-17. [Standard] Tab of Device Setup Dialog Box
<3> Click the PRM File Read button to open the Parameter File Select dialog box. Select the parameter
file for the target device and then click the Open button.
Figure 3-18. Parameter File Select Dialog Box
45
User's Manual U18371EJ5V0UM