Table of Contents
Advertisement
CHAPTER
(c) Using the oscillator connected to the 78K0-OCD board (only when OCD0A and OCD0B or TOOLD0
and TOOLC0 are used)
Connect an oscillator or oscillation circuit to CLK1 on the 78K0-OCD board.
("Clock Board" is automatically selected for "Main Clock" in the Configuration dialog box of the debugger.)
The same frequency as that of the target device can be used.
Mount the 14-pin oscillator (5 V, CMOS type) in CLK1 of the 78K0-OCD board, as shown in Figure 4-29.
TXC-1, manufactured by Tokyo Quartz Co., Ltd. is recommended as an oscillator.
N.C.
N.C.
82
4
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
Figure 4-29.
Mounting Oscillator
5 V
5 V
CLK1
CLK1
Clock
Clock
User's Manual
U18371EJ5V0UM
14-pin type
14-pin type
Advertisement
Table of Contents
