Table of Contents
Advertisement
(e) Software break area
This area is used for software breaks.
[How to secure areas]
Refer to the following and secure the area.
SSS
<R>
(f) Pseudo real-time RAM monitor (RRM) area
To use pseudo real-time RAM monitoring, an area of "Debug monitor area (see (a)) + up to 128 bytes" is
required.
[How to secure "debug monitor area + 256 bytes"]
When using NEC Electronics compiler CC78K0, the area used for pseudo real-time RAM monitoring can be
secured using the linker option (-go). Figure 4-36 shows the Linker Options dialog box of the project manager.
Add 256 bytes to the area specified in (a) (to make the area 512 bytes in total). For details about the RAM
monitoring area, refer to the document "QB-MINI2 Operating Precautions".
Figure 4-36. Linker Option Setting (When Pseudo RAM Monitor and Software Break Are Used)
90
CHAPTER
4
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
CSEG
AT
07EH;
DB
0FFH, 0FFH
User's Manual
"SSS" is an arbitrary symbol name (eight characters or less)
U18371EJ5V0UM
Advertisement
Table of Contents
