Target System Design - Renesas QB-MINI2 User Manual

CHAPTER

5.1 Target System Design

This section describes the target system circuit design required for on-chip debugging and flash programming.
Figure 5-1 presents an overview of the MINICUBE2 communication interface.
figure, MINICUBE2 performs serial communication with the target device on the target system.
communication, communication circuits must be mounted on the target system.
circuits appropriately.
Target device Target device
Serial communication Serial communication
Target system Target system
106
5 HOW TO USE MINICUBE2 WITH 78K0S MICROCONTROLLER
Figure 5-1. Outline of Communication Interface
Communication circuits Communication circuits
must be mounted on must be mounted on
the target system. the target system.
(INTP) (INTP)
MINICUBE2 MINICUBE2
User's Manual U18371EJ5V0UM
As shown on the left side of the
Refer to this section to design
USB USB
communication communication
Host machine Host machine
For this