Table of Contents
Advertisement
CHAPTER
5
HOW TO USE MINICUBE2 WITH 78K0S MICROCONTROLLER
<4> Set the items in the [Target Device Connection], [Operation Mode] and [Supply Oscillator] areas, in
accordance with your programming environment. The following figure shows an example.
Figure 5-22. [Standard] Tab of Device Setup Dialog Box After Setting
<5> Next, set the items in the [Command options] and [Security flag settings] areas, in accordance with your
programming environment. The following figure shows an example.
Figure 5-23. [Advanced] Tab of Device Setup Dialog Box
133
User's Manual
U18371EJ5V0UM
Advertisement
Table of Contents
