1.2
Notes Before Using MINICUBE2
Chapters 1 and 2 present an overview and the basic specifications of MINICUBE2, and the following chapters
provide separate descriptions for the target devices and the purpose of use. To utilize this manual effectively,
refer to the following table and see the relevant chapter for your target device and purpose of use.
Target Device
V850
Target system design
On-chip debugging
Flash memory programming
78K0
Target system design
On-chip debugging
Flash memory programming
78K0S
Target system design
On-chip debugging
Flash memory programming
78K0R
Target system design
On-chip debugging
Flash memory programming
-
MINICUBE2 self-testing
-
Expansion of supported devices
1.3
Supported Devices
Access the following MINICUBE2 information site or refer to the document for details on the devices that
support debugging and flash programming with MINICUBE2. The document describes the development tools
that are required as the support conditions, serial interface and operating precautions, so be sure to read the
document, in addition to this manual.
• MINICUBE2 information site
URL: http://www.necel.com/micro/english/product/sc/allflash/minicube2.html
• Document
Document name: QB-MINI2 Operating Precautions
Remark The above-mentioned document is posted on the MINICUBE2 information Web site.
CHAPTER
1
Table 1-1. Chapters Corresponding to Usage
Purpose of Use
CHAPTER 3
V850 MICROCONTROLLER
3.1
3.2
3.3
CHAPTER 4
78K0 MICROCONTROLLER
4.1
4.2
4.3
CHAPTER 5
78K0S MICROCONTROLLER
5.1
5.2
5.3
CHAPTER 6 HOW TO USE MINICUBE2 WITH
78K0R MICROCONTROLLER
6.1
6.2
6.3
CHAPTER 7
CHAPTER 8
User's Manual
U18371EJ5V0UM
OVERVIEW
Relevant Chapter
HOW TO USE MINICUBE2 WITH
Target System Design
On-Chip Debugging
Flash Programming
HOW TO USE MINICUBE2 WITH
Target System Design
On-Chip Debugging
Flash Programming
HOW TO USE MINICUBE2 WITH
Target System Design
On-Chip Debugging
Flash Programming
Target System Design
On-Chip Debugging
Flash Programming
SELF-TESTING
FIRMWARE UPDATE
11