Table of Contents
Advertisement
CHAPTER
6
HOW TO USE MINICUBE2 WITH 78K0R MICROCONTROLLER
<4> Set the items in the [Target Device Connection], [Operation Mode] and [Supply Oscillator] areas, in
accordance with your programming environment. The following figure shows an example.
Figure 6-21. [Standard] Tab of Device Setup Dialog Box After Setting
<5> Next, set the items in the [Command options] and [Security flag settings] areas, in accordance with your
programming environment. The following figure shows an example.
Figure 6-22. [Advanced] Tab of Device Setup Dialog Box
164
User's Manual
U18371EJ5V0UM
Advertisement
Table of Contents
