Table of Contents
Advertisement
CHAPTER
This chapter describes the part names and functions of MINICUBE2 and its accessories.
The part names described in this chapter are used throughout this document.
overview of the various functions. Reading it through, the reader will gain a basic grasp of MINICUBE2 and the
self-check board that will facilitate reading of subsequent chapters. While reading this chapter, also check if the
hardware has a defect.
2.1
Names of Supplied Hardware
Figure 2-1 shows the names of hardware supplied with MINICUBE2.
MINICUBE2
MINICUBE2
16-pin target cable
16-pin target cable
78K0-OCD board
78K0-OCD board
(A 20 MHz oscillator mounted)
(A 20 MHz oscillator mounted)
2
NAMES AND FUNCTIONS OF HARDWARE
Figure 2-1. Names of Supplied Hardware
User's Manual
U18371EJ5V0UM
This chapter provides an
USB cable
USB cable
10-pin target cable
10-pin target cable
13
Advertisement
Table of Contents
