2.1
Test System Configuration
Components required for diagnostic program execution are shown in table 2.1, and the test system
configuration is shown in figure 2.1.
Table 2.1
Test System Components
Components
E8000 emulator (HS8000EST02H)
LAN board (HS7000ELN01H or HS7000ELN02H)
EV-chip board (HS7410EBH82H or HS7410EBK82H)
Serial interface cable (RS232C)
Bidirectional parallel interface cable (P1284)
Personal computer (DOS/V machine)
System floppy disk (HS7410EDD82SF)
(Host interface software (IPW) included)
Printer
Section 2 Configuration
Control board
(HS8000PWB81H)
Device control board
(HS7410EDD82H)
Trace board
(HS8000PWB82H)
PC I/F board
(HS8000PWB85H)
2
Remarks
Always necessary
Always necessary
Always necessary
Always necessary
Depends on user system
configuration
Always necessary
Always necessary
Optional
Always necessary
Always necessary
Optional