Table of Contents
Advertisement
CHAPTER
4.1.5
Mounting connector onto target system
The connector must be mounted on the target system for connecting MINICUBE2 with the target system.
2.54 mm pitch 10- or 16-pin general-purpose connector can be used.
• HIF3FC-10PA-2.54DS (10-pin right-angle type, made by Hirose Electric Co., Ltd.)
• HIF3FC-10PA-2.54DSA (10-pin straight type, made by Hirose Electric Co., Ltd.)
• HIF3FC-16PA-2.54DS (16-pin right-angle type, made by Hirose Electric Co., Ltd.)
• HIF3FC-16PA-2.54DSA (16-pin straight type, made by Hirose Electric Co., Ltd.)
• 7616-5002PL (16-pin right-angle type, made by Sumitomo 3M, Ltd.)
• 7616-6002PL (16-pin straight type, made by Sumitomo 3M, Ltd.)
Compact connectors and loose-wire cables are also available as options.
products, access the MINICUBE2 information site.
URL: http://www.necel.com/micro/english/product/sc/allflash/minicube2.html
Figure 4-23.
15
15
13
13
16
16
14
14
74
4
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
2.54 mm Pitch 10-/16-Pin General-Purpose Connector Pin Layout
TOP VIEW
TOP VIEW
Pin 1
Pin 1
Target system
Target system
16-pin
16-pin
11
11
9
9
7
7
5
5
3
3
12
12
10
10
8
8
6
6
4
4
Pin assignment of target connector
Pin assignment of target connector
to be mounted on target system
to be mounted on target system
User's Manual
The following products are recommended.
Pin assignment when MINICUBE2
Pin assignment when MINICUBE2
is connected in this direction
is connected in this direction
1
1
9
9
7
7
2
2
10
10
8
8
U18371EJ5V0UM
For more information on these
10-pin
10-pin
5
5
3
3
1
1
6
6
4
4
2
2
A
Advertisement
Table of Contents
