Table of Contents
Advertisement
CHAPTER
4
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
(2) Selection of program file
Select the program file, following the steps <1> to <3> described below.
<1> Click the [File] menu on the menu bar and then click [Load...].
<2> The program file select dialog box appears.
Figure 4-45. Program File Select Dialog Box
<3> Select the program file for the target device and then click the Open button.
Figure 4-46. Completion of Program File Selection
102
User's Manual
U18371EJ5V0UM
Advertisement
Table of Contents
