Table of Contents
Advertisement
Firmware is a program embedded in the device for controlling MINICUBE2.
by updating firmware.
• Addition of supported devices
• Correction of restrictions
This chapter describes the method for checking firmware version, system configuration, and firmware update
procedure.
Note that MINICUBE2 may no longer operate if firmware is updated incorrectly.
8.1 System Configuration
Figure 8-1 illustrates the system configuration for updating firmware.
<4>
<4>
<1> Host machine
Products with USB ports
<2> Software
Includes the USB driver and MINICUBE2 diagnostic tool.
These software can be installed when an NEC Electronics debugger or QB-Programmer is installed.
Download these NEC Electronics software from the following website (ODS).
URL: http://www.necel.com/micro/ods/eng/
<3> USB cable (accessory)
<4> MINICUBE2 (this product)
CHAPTER
8
Figure 8-1. System Configuration for Firmware Update
<3>
<3>
User's Manual
FIRMWARE UPDATE
U18371EJ5V0UM
The following can be implemented
<1>
<1>
<2>
<2>
171
Advertisement
Table of Contents
