Renesas QB-MINI2 User Manual page 115

CHAPTER
Figure 5-9. Circuit Connection for the Case Where MINICUBE2 Is Used for Debugging and
Debugging of INTP Pin Is Performed Only with Real Machine
Target connector Target connector
INTP INTP
Caution If debugging is performed with a real machine running, without using MINICUBE2, write the user
program using the QB-Programmer.
monitor program, and such a program malfunctions if it is not controlled via MINICUBE2.
5 HOW TO USE MINICUBE2 WITH 78K0S MICROCONTROLLER
V V
DD DD
1 kΩ 1 kΩ
Jumper Jumper
12 12 1 1
2 2
3 3
* Jumper setting
When debugging with MINICUBE2 connected: 1-2 shorted
Other than above:
Programs downloaded by the debugger include the
User's Manual U18371EJ5V0UM
Target device Target device
INTP INTP
External device External device
I/O to INTP I/O to INTP
2-3 shorted
113