System Configuration - Renesas QB-RL78I1A User Manual

QB-RL78I1A In-Circuit Emulator

1.4 System Configuration

This section shows the system configuration when using the QB-RL78I1A connected to a PC (Windows
TM
PC/AT compatible). Connection is possible even without optional products.
<1> Host machine
<2> Accessory Disk
<3> USB interface cable
<4> AC adapter
<5> QB-RL78I1A
<6> Check pin adapter (optional)
<7> Emulation probe
<8> Exchange adapter
<9> Space adapter (optional)
<10> YQ connector
<11> Target connector
<12> Mount adapter (optional)
<13> Device
<14> Target system
R20UT0766EJ0200 Rev.2.00
2012.03.30
Figure 1-2. System Configuration
: Windows PC, IBM PC/AT compatible can be used
: Manual, etc.
: Cable connecting QB-RL78I1A to host machine
: AC adapters classified by region
: This product
: Adapter used for monitoring waveforms with oscilloscope
: High-characteristic FPC type emulation probe
: Adapter that performs pin conversion
: Adapter used for height adjustment
: Connector that connects exchange adapter to target connector
: Connector soldered to target system
: Adapter used for mounting target device into socket
: Target device
CHAPTER 1 GENERAL
TM
PC,
Page 13 of 38