System Configuration - Renesas QB-RL78F14 User Manual

QB-RL78F14 In-Circuit Emulator

1.4 System Configuration

This section shows the system configuration when using the QB-RL78F14 connected to a PC (Windows
TM
PC/AT compatible). Connection is possible even without optional products.
< 4 >
< 11 >
< 12 >
<1> Host machine
<2> USB interface cable
<3> AC adapter
<4> QB-RL78F14
<5> Check pin adapter (optional)
<6> Emulation probe
<7> Exchange adapter
<8> Space adapter (optional)
<9> YQ connector
<10> Target connector
<11> Mount adapter (optional)
<12> Device
<13> Target system
R20UT2058EJ0300 Rev.3.00
Oct 31, 2013
Figure 1-2. System Configuration
< 2 >
< 3 >
< 5 >
< 6 >
< 7 >
< 8 >
< 9 >
< 10 >
< 13 >
T type
: Windows PC, IBM PC/AT compatible can be used
: Cable connecting QB-RL78F14 to host machine
: AC adapters classified by region
: This product
: Adapter used for monitoring waveforms with oscilloscope
: High-characteristic FPC type emulation probe
: Adapter that performs pin conversion
: Adapter used for height adjustment
: Connector that connects exchange adapter to target connector
: Connector soldered to target system
: Adapter used for mounting target device into socket
: Target device
CHAPTER 1 GENERAL
< 1 >
S type
TM
PC,
< 7 >
< 10 >
< 13 >
Page 12 of 41