System Configuration - Renesas QB-RL78G1F User Manual

QB-RL78G1F In-Circuit Emulator

1.4 System Configuration

This section shows the system configuration when using the QB-RL78G1F connected to a PC (Windows
TM
PC/AT compatible). Connection is possible even without optional products.
< 4 >
< 11 >
< 12 >
<1> Host machine
<2> USB interface cable
<3> AC adapter
<4> QB-RL78G1F
<5> Check pin adapter (optional)
<6> Emulation probe
<7> Exchange adapter
<8> Space adapter (optional)
<9> YQ connector
<10> Target connector
<11> Mount adapter (optional)
<12> Device
<13> Target system
R20UT3352EJ0100 Rev.1.00
Jan 30, 2015
< 2 >
< 3 >
< 5 >
< 6 >
< 7 >
< 8 >
< 9 >
< 10 >
< 13 >
T type
Figure 1-3 . System Configuration
: Windows PC, IBM PC/AT compatible can be used
: Cable connecting QB-RL78G1F to host machine
: AC adapters classified by region
: This product
: Adapter used for monitoring waveforms with oscilloscope
: High-characteristic FPC type emulation probe
: Adapter that performs pin conversion
: Adapter used for height adjustment
: Connector that connects exchange adapter to target connector
: Connector soldered to target system
: Adapter used for mounting target device into socket
: Target device
< 1 >
CHAPTER 1 GENERAL
TM
< 7 >
< 10 >
< 13 >
S type
Page 12 of 41
PC,