Table of Contents
Advertisement
1. Circumstances not covered by product guarantee
• If the product was disassembled, altered, or repaired by the customer
• If it was dropped, broken, or given another strong shock
• Use at overvoltage, use outside guaranteed temperature range, storing outside guaranteed
temperature range
• If power was turned on while the USB cable or connection to the target system was in an
unsatisfactory state
• If the cable of the USB cable, the target cable, or the like was bent or pulled excessively
• If the product got wet
• If this product is connected to the target system when there is a potential difference between the
GND of this product and GND of the target system.
• If the connectors or cables are plugged/unplugged while this product is in the power-on state.
• If excessive load is applied to the connectors or sockets.
• If a metal part of the interface connector or another such part comes in contact with an electrostatic
charge
• If specifications other than those specified are used for the USB port
2. Safety precautions
• The product may become hot depending on the status of use. Be careful of low temperature burns
and other dangers due to the product becoming hot.
• Be careful of electrical shock. There is a danger of electrical shock if the product is used as
described above in 1 Circumstances not covered by product guarantee.
• Do not use a device that was used for on-chip debugging as the official product.
4
General Precautions for Handling This Product
User's Manual U18371EJ5V0UM
Advertisement
Table of Contents
