Renesas QB-MINI2 User Manual page 8

Terminology
Related Documents
Documents Related to Development Tools (User's Manuals)
QB-MINI2 On-Chip Debug Emulator with Programming Function
QB-MINI2 Setup Manual
<R> ID850QB Ver. 3.40 Integrated Debugger
<R>
ID78K0-QB Ver. 3.10 Integrated Debugger
<R>
ID78K0S-QB Ver. 2.90 Integrated Debugger
ID78K0R-QB Ver. 3.20 Integrated Debugger
QB-Programmer Programming GUI Operation
MINICUBE2 Diagnostic Tool
MINICUBE OCD Checker
Caution The related documents listed above are subject to change without notice. Be sure to use the latest
version of each document for designing, etc.
Documents Related to Development Tools (Documents except User's Manuals)
QB-MINI2 Operating Precautions
Caution The related documents listed above are subject to change without notice. Be sure to use the latest
version of each document for designing, etc.
6
The meanings of the terms used in this manual are described in the table below.
Term
MINICUBE2 Generic name of QB-MINI2
Target device This is the device to be emulated.
Target system This is the system to be debugged (user-created system).
It includes software and hardware created by the user.
OCD unit OCD is an abbreviation of On-Chip Debug
The OCD unit means the debug function block embedded in the target
device.
Firmware Program embedded in the device for controlling MINICUBE2
QB-Programmer GUI software used to perform flash programming
Please use the following documents in conjunction with this manual.
The related documents listed below may include preliminary versions. However,
preliminary versions are not marked as such.
Document Name
Partner Tool
Operation
Operation
Operation
Operation
Document Name
User's Manual U18371EJ5V0UM
Meaning
Document Number
This document
U19158E
U18604E
U19611E
U18247E
U17839E
U18527E
U18588E
U18591E
Document Number
ZUD-CD-07-1212-E