Renesas QB-MINI2-RF Setup Manual

Preface
１
Thank you for purchasing MINICUBE2 Wireless Option (QB-MINI2-RF).
This product can be used with the programmable on-chip debug emulator
MINICUBE2 to make the connection between your development system
and MINICUBE2 wireless.
This document describes how to prepare to use and start this product
and also describes wireless communication.
<1> Checking the package contents
Check the package contents in accordance with the packing list supplied
with QB-MINI2-RF.
If there are any missing or damaged items, contact an Renesas Electronics
sales representative or distributor.
<2> Product information and documents
For information on QB-MINI2-RF, access the following Renesas Electronics
website. (hereinafter referred to as Wireless Option information site).
http://www.renesas.com/minicube2
Click "Wireless Option" on the above website.
２ Software Installation
First, Install the software necessary to use this product.
<1> Software for MINICUBE2
Install the software tool (CubeSuite+ etc) for using MINICUBE2 in a
standard configuration. And the MINICUBE2 USB driver must be installed.
<2> Runtime libraries provided by Microsoft
For Windows Xp, install the runtime libraries provided by Microsoft.
-Microsoft .NET Framework 2.0 Service Pack 1
-Microsoft Visual C++ 2005 Redistributable
The above libraries can be downloaded from a website that is linked
to the wireless option information website.
Setting up Wireless Unit and Checking Unit ID
３
This product includes two wireless units (QB-MINI2-RM). One unit is
connected to MINICUBE2 and the other is connected to the user system.
Switch the former unit to "H" and the latter unit to "T". The wireless
units will not be damaged by connecting them with a different setting,
but note that they might malfunction.
Set the unit to
connect to
T
MINICUBE2 to "H"
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an Renesas Electronics sales representative for availability and additional information.
Document No.R20AN0143EJ0100
Date Published September 2011
ＱＢ－ＭＩＮＩ２－ＲＦ
ＭＩＮＩＣＵＢＥ２ Wireless Option
Set the unit to
connect to the
H T
user system to "T"
Documents for this product are also provided on the wireless option
information website.
<3> Software download
Renesas Electronics software for QB-MINI2-RF is available on the
following website (hereinafter referred to as ODS).
http://www2.renesas.com/micro/en/ods/
Click "Version-up Service" on the above website, and then, on the next
website, click "MINICUBE2_Software".
We recommend using the latest software. If you want to be notified
about software updates, subscribe to the Version-up Service according
to the Version-up Service guide.
To use software made by a partner company, see the documents issued
by that company.
<3> MINICUBE2 RF utility
The MINICUBE2 RF utility (the RF utility) is used for monitoring the used
radio frequency, the unit ID specified for the connection destination, and
the wireless connection status.
Download the RF utility from among the MINICUBE2 software products
available with the Version-up Service, and then decompress it.
"mqb2rftul.exe" is the RF utility.
Target OS : Same as MINICUBE2.
The wireless units have four-digit unit IDs that are unique to each
product. Memorize the unit IDs of the two wireless units because they
will be used for identification when connecting them wirelessly.
H
QB-MINI2-RM
Unit ID 0001H
SER NO.XXXXXXXXXX
© 2011 Renesas Electronics Corporation. All rights reserved.
Unit ID