Table of Contents
Advertisement
CHAPTER
(d) Using the oscillator circuit connected to the 78K0-OCD board (only when OCD0A and OCD0B or
TOOLD0 and TOOLC0 are used)
Connect an oscillator or oscillation circuit to CLK1 on the 78K0-OCD board.
("Clock Board" is automatically selected for "Main Clock" in the Configuration dialog box of the debugger.)
The same frequency as that of the target device can be used.
Refer to Figure 4-30 and mount an oscillator in CLK1 of the 78K0-OCD board.
appearance after mounting the oscillator.
"160-90-314" (made by PRECI-DIP) can be used as the parts board to be mounted in the socket.
Figure 4-30.
78K0-OCD Board Mounting Diagram and CLK1 Equivalent Circuit
Parts Mounting Diagram
Pin Number
Figure 4-31. Appearance After Mounting Oscillator
4
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
2-13
Capacitor CB
3-12
Capacitor CA
4-11
Ceramic resonator or crystal resonator
5-10
Resistance Rx
8-9
Shorted
User's Manual
U18371EJ5V0UM
CLK1 Equivalent
Connection
Figure 4-27 shows the
83
Advertisement
Table of Contents
