Table of Contents
Advertisement
CHAPTER
6
HOW TO USE MINICUBE2 WITH 78K0R MICROCONTROLLER
(1) Setting of programming environment
Set the programming environment, following the steps <1> to <6> described below.
<1> Click the [Device] menu on the menu bar and then click [Setup...].
<2> The Device Setup dialog box appears, in which the [Standard] tab is active.
Figure 6-19. [Standard] Tab of Device Setup Dialog Box
<3> Click the PRM File Read button to open the Parameter File Select dialog box. Select the parameter
file for the target device and then click the Open button.
Figure 6-20. Parameter File Select Dialog Box
163
User's Manual
U18371EJ5V0UM
Advertisement
Table of Contents
