Table of Contents
Advertisement
Readers
Purpose
Organization
How to Read This Manual
Conventions
INTRODUCTION
This manual is intended for users who wish to perform debugging using the QB-MINI2
(generic name: MINICUBE
The readers of this manual are assumed to be familiar with the device functions and
usage, and to have knowledge of debuggers and flash programming.
This manual is intended to give users an understanding of the basic specifications and
correct use of MINICUBE2.
This manual is divided into the following sections.
• General
• Names and functions of hardware
• Self-testing
• Firmware update
It is assumed that the readers of this manual have general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
This manual describes the basic setup procedures.
To understand the basic specifications and usages of MINICUBE2
→ Read this manual according to the CONTENTS.
revised points. The revised points can be easily searched by copying an "<R>" in
the PDF file and specifying it in the "Find what:" field.
To know the manipulations, command functions, and other software-related settings
of MINICUBE2
→ See the user's manual of the debugger to be used.
Note:
Caution:
Remark:
Numeric representation:
Prefix indicating power of 2
(address space, memory
capacity):
User's Manual U18371EJ5V0UM
®
2).
Footnote for item marked with Note in the text
Information requiring particular attention
Supplementary information
Binary ... xxxx or xxxxB
Decimal ... xxxx
Hexadecimal ... xxxxH
10
K (kilo): 2
= 1,024
20
M (mega): 2
= 1,024
The mark <R> shows major
2
5
Advertisement
Table of Contents
