Engine Governor Arm - Club Car Carryall 295 Maintenance And Service Manual

GASOLINE ENGINE, MUFFLER, FUEL SYSTEM,
AND CLUTCHES

ENGINE GOVERNOR ARM

See General Warnings, Section 1, Page 1-2.
Engine Governor Arm Adjustment
1. Loosen nut (1) on governor arm (2) (Figure 15-18, Page 15-23).
2. Force governor arm (2) forward until it stops. Hold in this position.
3. Insert small allen wrench into shaft (3) and rotate shaft counterclockwise (CCW) until it stops. Hold in this position.
4. Tighten nut (1).
1
2503
Figure 15-18 Governor Arm
Engine Governor Arm Removal and Installation
Refer to the engine manual for additional testing, removal, disassembly, and installation procedures. See the
Kawasaki FH680D engine manual (CC P/N 103351201).
3
2013 Carryall 295/XRT 1550 Maintenance and Service Manual
Engine Control Linkages
Page 15-23
15