Club Car Carryall 295 Maintenance And Service Manual page 114

8
Rear Hubs
8. Install rear brake caliper onto axle tube. See Brake Pad and Caliper Installation on page 6-7. See following
NOTE.
NOTE: It may be necessary to loosen the park brake adjuster arm on the caliper.
9. Install the tire and wheel and finger-tighten the lug nuts.
10. Lower the rear of the vehicle.
11. Tighten the axle nut (3) to 80 ft-lb (108 N·m). Position the locking cap (2) and install new cotter pin (1).
12. Install rubber dust cap onto wheel.
13. Tighten the lug nuts to 85 ft-lb (115 N·m) using a crisscross pattern.
14. Connect battery and spark plug wire(s) (gasoline vehicles only). See Connecting the Battery –
Gasoline/Diesel Vehicles on page 1-4.
Page 8-8 2013 Carryall 295/XRT 1550 Maintenance and Service Manual
WHEELS, TIRES AND HUBS