Club Car Carryall 295 Maintenance And Service Manual page 91

STEERING AND FRONT SUSPENSION
2053
Figure 7-12 Remove Pinion from Housing
12. Inspect the bushing (17) and needle bearing (14) for excessive wear. If wear is excessive, replace the complete
rack and pinion steering assembly (Figure 7-16, Page 7-8).
13. Inspect the inner ball joints for wear (Figure 7-16, Page 7-8). If either is excessively worn, replace both ball joints.
13.1.Secure the rack and housing assembly in a vise (Figure 7-14, Page 7-7). See following CAUTION.
CAUTION
• Use wood blocks between the rack and the jaws of the vise to protect the rack from damage.
13.2.Tap the flange out of the notch in the rack (Figure 7-15, Page 7-7).
13.3.Remove the ball joint from the rack.
14. Remove the rack (2) from the housing (1) (Figure 7-16, Page 7-8).
2055
Figure 7-14 Secure Racks
1. Press Ram 2. Pinion Gear 3. Bearing
2054
2056
2013 Carryall 295/XRT 1550 Maintenance and Service Manual
Rack and Pinion
1
2
3
Figure 7-13 Remove Pinion Gear
Figure 7-15 Remove Inner Ball Joints
7
Page 7-7