Table of Contents
Advertisement
GASOLINE VEHICLE - FUEL SYSTEM
GOVERNOR CABLE
Governor Cable Removal
1.
Turn the key switch to the OFF position and remove the key, place the Forward/Neutral/Reverse control (FNR) in
the NEUTRAL position, and chock the wheels.
2.
Disconnect battery and spark plug wire.
3.
At engine:
3.1.
If equipped, remove air deflector from top of engine.
3.2.
Remove the governor cable fitting (1) from the linkage retainer (2) (Figure 21-4, Page 21-5).
3.3.
Disconnect the governor cable fitting from throttle lever (3).
3.4.
Unsnap governor cable from throttle body bracket (4).
4.
At transaxle:
4.1.
Disconnect "Z" fitting of governor cable (1) from governor arm (2) (Figure 21-5, Page 21-5).
4.2.
Loosen jam nuts at governor bracket (3) and remove the governor cable from vehicle.
Figure 21-4 Governor Cable Removal - Throttle Body
Figure 21-5 Governor Cable Removal - Governor Arm
2019 Carryall 550 Maintenance and Service Manual
Engine Control Linkages
Page 21-5
21
Advertisement
Table of Contents
Troubleshooting
