Club Car Carryall 295 Maintenance And Service Manual page 405

HYDRAULIC ATTACHMENT SYSTEM
2283
Figure 19-67 Install and Tighten Piston Nut
20. Put oil on the Teflon seal on the piston (Figure 19-69, Page 19-35).
21. Install the rod assembly in the cylinder case (Figure 19-70, Page 19-35).
22. Put oil on the seals and threads on the head (Figure 19-71, Page 19-35).
23. Use the adjustable gland nut wrench to tighten the head until the head is flush with the case (Figure 19-72,
Page 19-35).
2285
Figure 19-69 Lubricate Piston Seal
2287
Figure 19-71 Lubricate Head Seals
2284
2286
2288
2013 Carryall 295/XRT 1550 Maintenance and Service Manual
Figure 19-68 Lubricate Seal
Figure 19-70 Install Rod Assembly
Figure 19-72 Tighten Head Against Case
19
Cylinders
Page 19-35