Club Car Carryall 295 Maintenance And Service Manual page 312

16
Diesel Engine
2177
Figure 16-1 Disconnect Coolant Hoses, Fuel Lines,
Accelerator Cable and Fuel Solenoid Valve Connector
10. Remove the fuel return line (4) at the engine relief valve port and securely plug the fuel return line (Figure
16-1, Page 16-2). See previous DANGER.
11. Remove the accelerator cable (5) from the accelerator lever (Figure 16-1, Page 16-2).
12. Remove the accelerator cable sheath strain relief (6) from the engine bracket.
13. Disconnect the three-pin connector (7) on the fuel solenoid valve from the engine (Figure 16-1, Page 16-2).
14. Disconnect the thermostat switch connector (8) from the wire harness (Figure 16-2, Page 16-2).
15. Disconnect the oil pressure switch connector (9) from the wire harness.
16. Disconnect the green wire (10) from the starter solenoid and the blue wire (11) from the white solenoid wire
at the one-pin connector (Figure 16-2, Page 16-2).
17. Disconnect the red wires (12) from the starter solenoid.
18. Disconnect the two black ground wires (13) from the engine block.
19. Disconnect the air filter outlet hose from the intake manifold.
20. Loosen the hardware that secures the muffler. See Muffler Removal on page 16-5.
Page 16-2 2013 Carryall 295/XRT 1550 Maintenance and Service Manual
1
2
DIESEL ENGINE, MUFFLER, FUEL SYSTEM,
8
9
13
2178
Figure 16-2 Disconnect Thermostat Switch, Starter Wires
and Ground Wires
AND CLUTCHES
10
11
12