Front Mount; Front Mount Removal - Club Car Carryall 295 Maintenance And Service Manual

HYDRAULIC ATTACHMENT SYSTEM
1. Remove the two bushings (1) (Figure 19-81, Page 19-38) from both sides of the angle frame.
2. Apply LOCTITE 271 (Red) to the bushing before installing them into the angle frame.
3. Install the two bushings (1) (Figure 19-82, Page 19-38) on both sides of the angle frame.

FRONT MOUNT

FRONT MOUNT REMOVAL

1
Front Mount Not Shown For Clarity
2299
Figure 19-83 Front Fascia Bolts
WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
– Fluids are under pressure.
– Flying debris or loose material is present.
– Engine is running.
– Tools are being used.
2300
2013 Carryall 295/XRT 1550 Maintenance and Service Manual
1
Figure 19-84 Front Mount Hardware
19
Front Mount
Page 19-39