Manual Brake Release - Models With Electric Drive - Terex Genie GS-1330m Service And Repair Manual

Service and Repair Manual
Steer Axle Components
6 Remove the bellcrank from the machine.
1 apply removable thread lock to fastener
threads
Note: While removing the bellcrank from the
machine, take note of the quantity and location of
the spacers between the bellcrank and the steer
links.
Note: Before re-installing the steer bellcrank onto
the machine, apply a small amount of removable
thread lock onto the threads of the fasteners.
Torque the fasteners to 31 ft-lbs / 42 Nm.
70
6-5
Manual Brake Release - Models
with electric drive
How to Manually Release the
Electric Brakes
performed due to machine or battery
failure.
1
Note: If the machine is on an incline it is
recommended that a secondary device such as a
forklift and towing strap be used to secure the
machine from rolling after the brakes have been
released.
GS ™ -30m • 32m • 30 • 32 • 46 • 55
This procedure should only be
Bodily injury and crushing
hazard. This procedure must
only be performed by a trained
service professional. Attempting
this procedure without the
necessary skills could result in
death or serious injury.
Chock the wheels at both ends of the
machine.
Bodily injury and crushing
hazard. Failure to properly
secure the machine from rolling
could result in property damage,
death or serious injury.
August 2021
Part No. 1309020GT