Schematics; Introduction - Terex Genie GS-1330m Service And Repair Manual

August 2021
Secti on 5 Schematic s
Observe and Obey:
Troubleshooting and repair procedures shall

be completed by a person trained and
qualified on the repair of this machine
Immediately tag and remove from service a

damaged or malfunctioning machine.
Repair any machine damage or malfunction

before operating the machine.
Before Troubleshooting:
Read, understand and obey the safety rules

and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and test

equipment are available and ready for use.
Part No. 1309020GT
About This Section
There are two groups of schematics in this section.
Electrical Schematics
Hydraulic Schematics
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Service and Repair Manual

Schematics

Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
207