Terex Genie GS-1330m Service And Repair Manual page 41

August 2021
5 Locate the diagnostic port on the side of the
GCON. Remove one of the fasteners securing
the cover and set aside. Loosen the other
fastener. Do not remove it.
1 diagnostic port
6 Connect one end of a CAT5 Ethernet cable
into the diagnostic port. Connect the other
end into a PC or laptop.
Result: The ground controls LCD display will
show the following:
7 Read and record the IP address.
Part No. 1309020GT
8
9
Note: Verify it is the correct flash file.
10 Select the Load Flash File button to verify
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Service and Repair Manual
Ground Controls
Launch a web browser such as Internet
Explorer ® , Chrome ® or Firefox
or laptop. Type the IP address from step
7 into the web browser address bar and press
enter.
Result: The following screen will be displayed.
Select the Choose File button and navigate
to the downloaded Genie Flash file (.gff).
the file is a .gff file.
Result: The following screen will be displayed.
® on your PC
27