Terex Genie GS-1330m Service And Repair Manual page 190

Service and Repair Manual
Diagnostics
Definitions
GSDS – Genie SmartLink™ Diagnostic System
ECM – Electronic Control Module
GCON – Ground Controls
PCON – Platform Controls
OIC – Operational Indicator Codes
DTC – Diagnostic Trouble Codes
176
GCON LCD Diagnostic Readout
The diagnostic readout displays alpha numeric
codes that provide information about the machine
operating status and about malfunctions.
The codes listed in the Diagnostic Trouble Code
Charts describe malfunctions and can aid in
troubleshooting the machine by pinpointing the
area or component affected.
Models are listed below each code to assist in the
troubleshooting codes for a specific model.
Genie
System
This machine is equipped with the Genie
SmartLink™ Diagnostic System (GSDS). The
GSDS indicates a machine malfunction has
happened by displaying Operational Indicator
Codes (OIC) and Diagnostic Trouble Codes
(DTC). These codes are displayed at the Platform
Controls and the Ground Controls. The Ground
Controls will display a brief description of the code
at the LCD display as well. Refer to the GCON I/O
Maps, Operational Indicator Codes (OIC) and
Diagnostic Trouble Codes (DTC) in this section, to
assist in troubleshooting faults.
GS ™ -30m • 32m • 30 • 32 • 46 • 55
SmartLink Diagnostic
® ™
Part No. 1309020GT
August 2021