Hydraulic Oil Specifications - Terex Genie GS-1330m Service And Repair Manual

Hide thumbs Also See for Genie GS-1330m:
Table of Contents

Advertisement

August 2021
Function speed, maximum from platform controls
(with 1 person in platform)
Models with electric drive
GS-2046
Platform up
Platform down
GS-2646, GS-2646 XH
Platform up
Platform down
GS-3246, GS-3246 XH
Platform up
Platform down
GS-4046
Platform up
Platform down
GS-4655
Platform up
Platform down
GS-3232 Outrigger leveling capacity, maximum
Side to side
Front to rear
Part No. 1309020GT

Hydraulic Oil Specifications

Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
34 to 41 seconds
systems, have the ability to perform over a wide
26 to 34 seconds
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation prevention, corrosion inhibition, seal
37 to 43 seconds
conditioning, and foam and aeration suppression
26 to 34 seconds
properties.
Cleanliness level,
minimum
53 to 61 seconds
26 to 34 seconds
Water content,
maximum
62 to 72 seconds
Recommended Hydraulic Fluid
39 to 48 seconds
Hydraulic oil type
Viscosity grade
91 to 95 seconds
Viscosity index
56 to 60 seconds
Optional Hydraulic Fluids
Mineral based
Biodegradable
Fire resistant
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult Genie
Product Support before use.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond its
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.
GS
-30m • 32m • 30 • 32 • 46 • 55
Service and Repair Manual
Specifications
Chevron Rando HD Premium
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Shell Tellus S4 VX 32
Shell Donax TG (Dexron III)
Chevron 5606A
Petro Canada Environ MV 46
UCON Hydrolube HP-5046
Optional fluids may not have
the same hydraulic lifespan and
may result in component
damage.
ISO 15/13
250 ppm
32
200
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents