Software Revision Level - Terex Genie GS-1330m Service And Repair Manual

Service and Repair Manual
Ground Controls
2-1

Software Revision Level

How to Determine the Revision
Level
The machine software revision level is displayed at
the ground controls LCD display.
1 Turn the key switch to the ground controls or
platform controls position. Pull out the red
Emergency Stop button to the on position at
both ground and platform controls.
Result: The display at the platform controls
will show "CH". See example below.
Result: The display at the ground controls will
show SELECT IN/OUT and machine hours.
24
2
Result: The ground control LCD display will
indicate the machine model, software part number
and software revision.
3
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Press the scroll down button twice.
Push in the red Emergency Stop button to the
off position at both the ground and platform
controls and turn the key switch to the off
position.
1 LCD display
2 scroll down button
August 2021
Part No. 1309020GT