Platform Extension Deck - Terex Genie GS-1330m Service And Repair Manual

August 2021
10-2

Platform Extension Deck

How to Remove the Platform
Extension Deck
1 Lower the platform to the stowed position.
2 GS-4655: Fully extend the platform extension
deck.
All other models: Extend the platform
approximately 3 ft / 1 m.
3 Remove the platform controls from the
platform.
4 Support the platform extension with a forklift
at the steer end of the machine. Do not apply
any lifting pressure.
5 Attach a strap from the platform extension
railings to the carriage on the forklift to help
support the platform extension.
6 Remove the fasteners from each platform
extension roller bracket assembly. Remove
each assembly from the machine.
Note: Do not remove the platform roller bolt.
1 roller bracket assembly
2 retaining fasteners
3 platform roller bolt
Part No. 1309020GT
7
8
How to Replace the Platform
Extension Deck Wear Pads
1
2
3
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Service and Repair Manual
Platform Components
Remove the platform roller wheels from the
machine.
Carefully slide the platform extension out from
the platform and place it on a structure
capable of supporting it.
Remove the Platform Extension Deck. Refer
to Repair Procedure, How to Remove the
Platform Extension.
Drill out the rivets which hold the wear pads in
place.
Install the new wear pads using new rivets.
When installing the new rivets, make sure the
rivet heads are not above the surface of the
wear pad.
169