Function Manifold Components - Models With Hydraulic Drive, Gs-1530, Gs-1532, Gs-1930, Gs-1932, Gs-1932 Xh - Terex Genie GS-1330m Service And Repair Manual

Service and Repair Manual
Manifolds
5-6
Function Manifold Components – Models with hydraulic drive,
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH
The function manifold is mounted under the machine, between the module trays.
Index No.
— Coil nut
— Coil nut
1 Diagnostic port
2 Check disc
Relief valve, 1800 to 3700 psi / 124 to
3
255 bar
4 Check valve, 10 psi / 0,7 bar
5 Solenoid valve, 3 position 4 way
6 Solenoid valve, 3 position 4 way
7 Flow regulator and relief valve,
0.75 gpm / 2,8 L/min, 1500 psi / 130 bar
8 Solenoid valve, 2 position 4 way
9 Relief valve, 3700 psi / 255 bar
How to Install a Valve Cartridge
1 Dip the cartridge in clean oil to lube the O-rings.
2 Screw the cartridge in by hand until the top O-ring is met, then torque to specifications.
3 If required, install the valve coil(s) onto the valve stem. Install the coil nut onto the valve stem and
torque to specifications.
52
Description
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Schematic
Function
Item
F —
E, H —
A Test port
B Steer circuit
C Lift relief
D Drive circuit
Drive
E
forward/reverse
F Steer left/right
G Steer circuit
H Platform up
I System relief
August 2021
Torque
4-5 ft-lbs / 5-7 Nm
5-7 ft-lbs / 7-9 Nm
—
18 ft-lbs / 24 Nm
20 ft-lbs / 27 Nm
20 ft-lbs / 27 Nm
25 ft-lbs / 34 Nm
25 ft-lbs / 34 Nm
26 ft-lbs / 35 Nm
25 ft-lbs / 34 Nm
20 ft-lbs / 27 Nm
Part No. 1309020GT