Platform Controls - Terex Genie GS-1330m Service And Repair Manual

Service and Repair Manual

Platform Controls

The platform controls are used to operate the
machine from the platform.
Activating a function button sends a signal to the
Electronic Control Module (ECM). When the ECM
is in the function mode, the platform controls are
used to operate the various machine functions.
The platform controls consist of an Emergency
Stop button, electronic circuit board, proportional
control handle, drive/steer enable switch, alarm,
function buttons and LED display.
For further information or assistance, contact
Genie Product Support.
1 red Emergency Stop button P2
2 platform controls circuit board U2
3 proportional control handle and drive/steer
enable switch JC1
4 alarm H3
18 GS ™ -30m • 32m • 30 • 32 • 46 • 55
August 2021
Part No. 1309020GT