Gearbox Oil - BRP can-am OUTLANDER 2021 Series Operator's Manual

MAINTENANCE PROCEDURES
vmo2013-007-013_a
1. CVT air filter
2. Tab
CVT Air Filter Cleaning
1. Spray filter inside and out with a
good air filter cleaner and follow
manufacturer's instructions.
2. Dry filter completely.
vmo2010-004-016_a
1. CVT air filter (slip-on type)
vmo2013-007-019_a
1. CVT air filter (clip-on type)
3. Clean inside the CVT air inlet end.
______________
156
CVT Air Filter Installation
Models with Slip-On Air Filter
Install air filter on CVT inlet by stretch-
ing its sides.
Models with Clip-On Air Filter
Install air filter on CVT by inserting tabs
in their slots and push on air filter until it
clicks.
All Models
Install the gauge support.
219001854-001_b
Step 1: Hook
Step 2: Engage retaining tab

Gearbox Oil

Gearbox Oil Level Verification
NOTICE
Check level and refill if
necessary. Do not overfill. Operat-
ing the gearbox with an improper
level may severely damage gear-
box. Wipe off any spillage.
Place the vehicle on a level surface.
Select NEUTRAL position.
Apply the parking brake.
NOTE: Check the gearbox oil level
when engine is cold and not running.
Remove the gearbox oil level plug.