BRP can-am OUTLANDER 2021 Series Operator's Manual page 161

V07I0IY
Remove the throttle body side cover.
vmo2006-007-032_a
1. Throttle body
2. Side cover screws
Insert the needle of the lubricant can in
the end of throttle cable adjuster.
CAUTION Always
propriate skin and eye protection.
Chemicals can cause a skin rash and
eye injury.
TYPICAL
NOTE: Place a rag around the throttle
cable adjuster to prevent the lubricant
from splashing.
Add lubricant until it runs out at throttle
body end of the throttle cable.
Reinstall and adjust the cable.
Throttle Cable Adjustment
Slide rubber protector back to expose
throttle cable adjuster.
wear ap-
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Loosen lock nut then turn the adjuster
to obtain correct throttle lever free play.
NOTE: Measure throttle free play at
the tip of throttle lever.
______________
MAINTENANCE PROCEDURES
V07I0JY
1
V07I0GY
2 3 4
159