Engine Oil - BRP can-am OUTLANDER 2021 Series Operator's Manual

sorbent cloth and squeezing gently.
This will also ensure a full oil cover-
age on foam filter.
5. Reinstall the foam filter over the pa-
per filter.
vbs2009-012-001
TYPICAL
6. Slightly grease plastic body of filter
for ease of installation and future re-
moval.
Air Filter Installation
Reinstall oiled foam filter on paper air
filter.
Slightly grease O-ring seal and plastic
body of air filter.
Install air filter as the reverse of re-
moval.
Ensure air filter cover is properly locked
onto the air filter housing. See indica-
tions on filter cover and housing.
vmr2012-005-001_a
1. Cover position arrow
2. Locked
3. Unlocked
Install console as the reverse of re-
moval. However, pay attention to the
following.
Align console front tabs with slots,
then push console forward.
Then align and insert studs with grom-
mets on rear portion of console until
studs engage with grommets.
vmo2014-007-001_a
TYPICAL
1. Console
2. Studs and grommets
Reinstall the seat.

Engine Oil

Engine Oil Level
NOTICE
and refill if necessary. Do not over-
fill. Operating the engine/gearbox
with an improper level may severely
damage engine/gearbox. Wipe off
any spillage.
NOTE: While checking the oil level, vi-
sually inspect engine area for leaks.
______________
MAINTENANCE PROCEDURES
Check level frequently
147