BRP can-am OUTLANDER 2021 Series Operator's Manual page 203

MAINTENANCE
REQUIRED (2)
TPS FAULT PRESS
OVERRIDE BUTTON TO
LIMP HOME
NOTICE
(1) If the message and the check engine light stay on after engine
starting, stop engine. Check engine oil level. Refill if necessary. If the oil
level is good, seek service from an authorized Can-Am dealer, repair shop or
person of your own choosing for maintenance, repair or replacement. Please
US EPA EMISSION-RELATED WARRANTY
refer to the
information about warranty claims. Do not use the vehicle until repaired.
(2)
To erase the MAINTENANCE REQUIRED message, proceed as follows:
1. From main display (vehicle speed), press SET and HOLD.
2. Alternate between LOW beam and HIGH beam 3 times.
NOTE: Step 2 must be completed within 2 seconds.
3. Release SET button.
None Displayed in gauge when vehicle is due for a maintenance.
Throttle position sensor does not work properly. Seek
service from an authorized Can-Am dealer, repair shop or
person of your own choosing for maintenance, repair or
Check engine
replacement. Please refer to the US EPA Emissions-related
warranty contained herein for information about warranty
claims.
______________
MULTIFUNCTION GAUGE MESSAGES
contained herein for
201