Multifunction Gauge Messages - BRP can-am OUTLANDER 2021 Series Operator's Manual

MULTIFUNCTION GAUGE MESSAGES

MESSAGE
BAD KEY
DESS KEY NOT
RECOGNIZED
PARK BRAKE
LO BATT VOLT
HIGH BATT VOLT
(1)
LOW OIL
HI TEMP
LIMP HOME
CHECK ENGINE
ECM NOT RECOGNIZED
CHECK DPS (models
with DPS)
______________
200
PILOT LAMP(S)
ON
Indicates that you have used the wrong D.E.S.S. key, use
Check engine
the proper key for this vehicle.
Indicates that there possibly is a bad contact, remove and
Check engine
clean key.
Displayed when brake is applied for more than 15 seconds
Parking brake
(while riding).
Low battery voltage, check battery voltage and charging
Check engine
system.
High battery voltage, check battery voltage and charging
Check engine
system.
Check engine Engine low oil pressure, stop engine immediately.
Engine is overheating, refer to
Check engine
TROUBLESHOOTING
Serious fault on the engine that can change the normal
Check engine operation of the engine, CHECK ENGINE indicator lamp
will also blink, refer to
Engine fault, CHECK ENGINE indicator lamp will also be
Check engine
ON, refer to
Communication error between speedometer and engine
Check engine
control module (ECM).
Indicates that the DPS (Dynamic Power Steering) does not
Check engine
work properly. See an authorized Can-Am dealer.
DESCRIPTION
.
TROUBLESHOOTING
TROUBLESHOOTING
.
ENGINE OVERHEATS
.
in