Heated Throttle Lever (If Equipped); Grab Handles (2-Up Models) - BRP can-am OUTLANDER 2021 Series Operator's Manual

EQUIPMENT
219001854-002_c
1. Heated grips switch
Press the switch again to increase the
heat level. Each time the switch is
pressed, the heat level increases.
To turn off, reach the maximum heat
level, then press the switch once
more.
6) Heated Throttle Lever
(If Equipped)
The throttle lever has 4 levels of heat.
The heat level is indicated by the LEDs
above the switch. No LED lit indicates
that the heated grips are off.
219001854-002_d
1. LED heat level
Press the switch once to turn on.
______________
116
219001854-002_e
1. Heated throttle lever switch
Press the switch again to increase the
heat level. Each time the switch is
pressed, the heat level increases.
To turn off, reach the maximum heat
level, then press the switch once
more.
7) Grab Handles (2-UP
Models)
The grab handles are located on the RH
and LH side of the passenger's seat.
The grab handles must be used by the
passenger to hold on firmly during vehi-
cle operation.
WARNING
The passenger must always hold
on to the passenger grab han-
dles, not the operator. He must
also have both feet resting firmly
against the footrests.
vmo2015-007-010_b
TYPICAL
1. Grab handles
2. Passenger's seat