Drive Shaft Boot And Protector - BRP can-am OUTLANDER 2021 Series Operator's Manual

vmo2012-012-059_b
LOW BEAM ADJUSTMENT
1. Adjustment knobs
vmo2012-012-060_a
HIGH BEAM ADJUSTMENT
1. Adjustment knobs
Taillight Bulbs Replacement
Rotate taillight counterclockwise to re-
move it from taillight housing.
vmo2012-012-061_a
Pull tail light out of its location.
Unplug connector from bulb.
Rotate light bulb counterclockwise to
remove it from taillight.
vmo2012-012-062_a
Remove bulb socket from taillight.
Installation is the reverse of the re-
moval procedure.
Drive Shaft Boot and
Protector

Drive Shaft Boot and Protector

Inspection
Visually inspect drive shaft protectors
and boots conditions.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease etc.
Repair or replace damaged parts as
necessary.
219001961-009_a
TYPICAL — FRONT OF VEHICLE
1. Drive shaft boots
2. Protector
______________
MAINTENANCE PROCEDURES
167